Description
PHILIPS GreenPerform Cold Room Highbay BY690P Series
The cold-store version of GreenPerform Highbay G5: 63–170 W, 10,500–30,000 lm at ~170 lm/W, rated for −40 °C and 0–100% relative humidity. The 2025 model moves the breather into the cable-exit hub and lifts system efficacy by roughly 6% over the 2023 range.
Two changes, one new 12NC block
The 2025 model is not a new platform. The die-cast body, the lens array and the Ø290 / Ø330 / Ø393 mm footprints are unchanged, so the mounting height and the hook position are the same as the 2023 model. What changed is the pressure-equalisation hardware and, as a result, the ordering codes.
| Item | 2023 model | 2025 model |
|---|---|---|
| Breather | Separate breather screwed into the heat sink | Integrated in the cable-exit hub — one part instead of two |
| Hook interface | Hook boss with a separate vent beside it | Hook boss and hub share one sealed moulding |
| 12NC block | 911401530591–911401532491 | 911401540745–911401541645 |
| System efficacy | 160 lm/W rated (LED105: 67 W) | ~170 lm/W typ. (LED105: 63 W) |
| Sealing / optics | IP66 / IK08, clip-in lens | IP66 / IK08, clip-in lens — unchanged |
2023 / 2025 Left: the separate breather on the heat sink. Right: breather relocated into the cable-exit hub, so nothing protrudes between the fins.
Ordering note. The 2025 codes are new 12NCs, not a revision of the old ones. A quote or PO written against 911401530591 points at the 2023 build, not this one — specify the 2025 block for the current model.
Built to survive a freezer, not just to be rated for one
A normal high bay dies in a freezer for one reason: air inside the housing contracts on every switch-off and pulls moisture past the gasket. Condensation forms on the lens, then freezes. BY690P is sealed to IP66 and pressure-equalised through the hub-mounted breather, so the housing breathes without letting water in.
Test rig Luminaire mounted beside the evaporator coil at −40 °C, cycled 5 minutes on / 10 minutes off.
Test status. Figures are Signify’s cold-room validation (last published count March 2022; cycling continued after that date). Because condensation inside a freezer is unavoidable over long run times, both Signify and we recommend scheduled cleaning of the lens and housing.
Four parts do the work
Die-cast aluminium body
Open convection fins on the outside, a gasketed optical chamber inside. The same body carries the LED board and the driver box, so there is only one sealing plane to maintain.
Clip-in lens array
One polycarbonate lens per LED, pressed in without screws. Individual lenses keep the beam clean at 85° ±5° (UGR 25) and stop the yellow patches that a single co-moulded cover produces.
Serviceable driver
The fixed-output PSU sits in the compact top box and can be replaced by qualified staff, so a driver failure does not scrap a luminaire that is already on the ceiling of a freezer.
0.3 m cable, IP connector
Factory-fitted 0.3 m cable with an IP connector, so the joint sits inside the cold zone rather than in the warm roof void where condensate runs back down the cable.
Cold chain, and the buildings that behave like one
BY690P is specified wherever the ceiling is cold, wet or both: cold-store racking aisles, freezer ante-rooms, refrigerated docks, and indoor winter venues where snow is kept on the floor year round.
Cold-chain distribution centre High bays on trunking between the racking rows; the IP66 housing copes with wash-down and door traffic.
Indoor winter venues Sub-zero ambient and near-saturation humidity for the whole season — the same conditions as a cold store, at 15 m.
Pick the tier by output, not by wattage
All five tiers share the same 4000 K / 6500 K options, CRI 80, 85° ±5° wide beam and IP66 rating. What grows is the body: Ø290 mm for 105 W and 150 W, Ø330 mm for 200 W, Ø393 mm for 250 W and 300 W.
Reading the bars. Bar length is luminous flux, scaled to the 30,000 lm top tier; wattage is printed under each tier. Lumen values are typical, tolerance −10% / +10%.
Technical specifications
| Parameter | LED105 | LED150 | LED200 | LED250 | LED300 |
|---|---|---|---|---|---|
| Optical | |||||
| Luminous flux (typ.) | 10,500 lm | 15,000 lm | 20,000 lm | 25,500 lm | 30,000 lm |
| System power (typ.) | 63 W | 88 W | 110 W | 144 W | 170 W |
| System efficacy (typ.) | ~170 lm/W · flux and power tolerance −10% / +10% | ||||
| Colour temperature | 4000 K (NW) / 6500 K (CW) | ||||
| Colour rendering | CRI 80 · colour consistency 5 SDCM | ||||
| Beam angle | Wide beam 85° ±5° · narrow beam 55° ±5° | ||||
| Unified glare rating | UGR 25 (WB) / UGR 22 (NB) | ||||
| Lumen maintenance | 75,000 h @ L70B50, Ta 35 °C | ||||
| Electrical | |||||
| Input voltage | 220–240 V ~, 50/60 Hz | ||||
| Power factor | 0.95 | ||||
| Total harmonic distortion | ≤15% (≤20% for LED105) | ||||
| Surge protection | 4 kV / 4 kV | ||||
| Flicker | Flicker free · MD ≤3.2%, Pst ≤0.5, SVM ≤0.4 | ||||
| Mechanical & environment | |||||
| Ingress / impact / corrosion | IP66 / IK08 / WF2 | ||||
| Protection class | Class I | ||||
| Ambient temperature | −40 °C to +50 °C (Ta 35 °C) | ||||
| Operating humidity | 0–100% RH | ||||
| Diameter | Ø290 mm | Ø290 mm | Ø330 mm | Ø393 mm | Ø393 mm |
| Height | 90 mm | 90 mm | 99 mm | 99 mm | 99 mm |
| Weight | 1.9 kg | 1.9 kg | 2.6 kg | 4.2 kg | 4.2 kg |
| Housing colour | RAL 7012 dark grey | ||||
| Connection | 0.3 m cable with IP connector | ||||
| Installation & compliance | |||||
| Mounting | Suspension by hook or pipe; surface mounting with bracket (hook and bracket ordered separately) | ||||
| Standard warranty | 3 years | ||||
| Certification | CCC / CB | ||||
Same footprint as the 2023 model
LED105 / LED150 Ø290 × 90 mm. LED200 is Ø330 × 99 mm; LED250 and LED300 are Ø393 × 99 mm.
| Packing | Tiers | Carton (mm) |
|---|---|---|
| Industrial carton, 1 pc | LED105, LED150 | 355 × 344 × 148 |
| Industrial carton, 1 pc | LED200 | 395 × 383 × 153 |
| Industrial carton, 1 pc | LED250, LED300 | 455 × 443 × 183 |
Packing note. One luminaire per carton, accessories not included. The hook and the bracket are always separate order lines.
Complete product lineup
Ten 12NCs: five output tiers, each in 4000 K (NW) and 6500 K (CW), wide beam, fixed output, GC version. Order the code in the first column — the model description follows the code it belongs to.
| 12NC | Description | Power | Ø × H | Output |
|---|---|---|---|---|
| 911401540745 | BY690P LED105/NW PSU WB GC | 63 W | Ø290 × 90 | 10,500 lm |
| 911401540845 | BY690P LED105/CW PSU WB GC | 63 W | Ø290 × 90 | 10,500 lm |
| 911401540945 | BY690P LED150/NW PSU WB GC | 88 W | Ø290 × 90 | 15,000 lm |
| 911401541045 | BY690P LED150/CW PSU WB GC | 88 W | Ø290 × 90 | 15,000 lm |
| 911401541145 | BY690P LED200/NW PSU WB GC | 110 W | Ø330 × 99 | 20,000 lm |
| 911401541245 | BY690P LED200/CW PSU WB GC | 110 W | Ø330 × 99 | 20,000 lm |
| 911401541345 | BY690P LED250/NW PSU WB GC | 144 W | Ø393 × 99 | 25,500 lm |
| 911401541445 | BY690P LED250/CW PSU WB GC | 144 W | Ø393 × 99 | 25,500 lm |
| 911401541545 | BY690P LED300/NW PSU WB GC | 170 W | Ø393 × 99 | 30,000 lm |
| 911401541645 | BY690P LED300/CW PSU WB GC | 170 W | Ø393 × 99 | 30,000 lm |
Mounting accessories
| 12NC | Accessory | Ordered |
|---|---|---|
| 911401559345 | Mounting hook, GreenPerform Highbay G5 | quoted with the luminaires |
| 911401594191 | BY698Z G5 bracket, surface mount | quoted with the luminaires |
Accessories have no page of their own. Hook and bracket are order lines quoted with the luminaires — name the version you are mounting when you order them.
Frequently asked questions
What is the difference between BY690P and the standard BY698P G5?
BY690P is the cold-room build of the same platform. It is rated IP66 instead of IP65, starts and runs from −40 °C instead of −30 °C, is rated for 0–100% relative humidity, and uses the hub-mounted breather that the 2025 update introduced. Optics, CRI, efficacy and the Ø290 / Ø330 / Ø393 mm bodies are identical. The hook and the surface bracket are ordered separately for either version (911401559345 / 911401594191).
Can it run continuously at −40 °C?
Yes. The rated ambient range is −40 °C to +50 °C at Ta 35 °C, and Signify’s freezer validation ran the luminaire at −40 °C on a 5 minutes on / 10 minutes off cycle with 5,000 cycles completed and the unit still operating normally at the last published count. Continuous operation is covered by the same rating; what is not covered is condensation that forms on the outside of the lens in a saturated room, which is why scheduled cleaning is recommended.
Which 12NC is 4000 K and which is 6500 K?
NW is 4000 K and CW is 6500 K. For example the 200 W tier is 911401541145 (NW) and 911401541245 (CW). All ten 2025 codes are listed in the lineup table above, in the order they appear on the price list.
Is a narrow-beam version available?
The 2025 GC ordering range covers wide beam only (85° ±5°, UGR 25). A narrow-beam optic (55° ±5°, UGR 22) exists on the platform and was part of the earlier cold-room range, but it carries 2023 codes — ask us for the current 12NC if your layout needs the 55° beam for high racking.
What is in the box, and what has to be ordered separately?
One luminaire with a factory-fitted 0.3 m cable and IP connector, in an industrial carton. The mounting hook (911401559345) and the surface bracket (911401594191) are always separate order lines — neither is in the carton. Standard warranty is 3 years, certification CCC and CB.

BY778P G2 Elite Highbay
BY175P G2 Highbay
BY518P SE GreenUp
WT198C G3 Waterproof
BVP150 G4 Floodlight
LL130X G2 Trunking
BGP150 G2 Spotlight
BRP26X Street Light


