Description
PHILIPS LED Highbay Light BY690P LED200 NW PSU WB GC 911401541145
Cold-room GreenPerform Highbay G5 in 4000 K neutral white (NW): 20,000 lm from 110 W, IP66 / IK08 / WF2, cold start at −40 °C and 0–100% relative humidity. Wide beam 85° ±5° (UGR 25), fixed output PSU, GC version with a 0.3 m cable and IP connector.
BY690P LED200/NW PSU WB GC
This is the 110 W / 20,000 lm step, in 4000 K neutral white (NW), and the first tier on the larger Ø330 mm body (2.6 kg, still 99 mm high). The extra diameter carries 5,000 lm more than the 150 W model. Breather sits in the cable-exit hub on the 2025 build, as on the rest of the range.
- 12NC
- 911401541145
- Description
- BY690P LED200/NW PSU WB GC
- Rated power
- 110 W
- Luminous flux
- 20,000 lm
- Colour temperature
- 4000 K (NW)
- Colour rendering
- CRI 80 · 5 SDCM
- Beam / UGR
- 85° ±5° (WB) / UGR 25
- Body
- Ø330 × 99 mm
- Weight
- 2.6 kg
- Ingress
- IP66 / IK08 / WF2
- Ambient
- −40 … +50 °C
- Lifetime
- 75,000 h L70B50
- Connection
- 0.3 m cable, IP connector
- Warranty
- 3 years
Suspension, surface mount, or pipe — one body, three ways
The Ø330 × 99 mm body takes a hook or a pipe at the top boss, or a bracket on the fins. The hook and the bracket are accessories, ordered separately, and neither is in the carton.
Hook suspension
Mounting hook 911401559345 clips into the top boss. The 2025 hub carries the breather, so the hook sits flat with no separate vent beside it.
Surface or pipe
BY698Z G5 bracket 911401594191 for direct surface mounting, or a pipe through the same boss. Body weight 2.6 kg, so a single fixing point is enough.
Wiring
0.3 m factory cable with IP connector, 220–240 V ~, Class I, 4 kV / 4 kV surge. Keeping the joint inside the cold zone stops condensate running back down the cable.
Cold-store detail. At 110 W the driver sits in the sealed top box and is replaceable by qualified staff, so a driver fault does not mean dropping the whole luminaire off a freezer ceiling.
Technical specifications — BY690P LED200/NW PSU WB GC
| Parameter | Value |
|---|---|
| Optical | |
| Luminous flux (typ.) | 20,000 lm · tolerance −10% / +10% |
| System efficacy (typ.) | ~170 lm/W (range typical) |
| Colour temperature | 4000 K · 4000 K neutral white (NW) |
| Colour rendering / consistency | CRI 80 · 5 SDCM |
| Beam angle | Wide beam 85° ±5° |
| Unified glare rating | UGR 25 |
| Lumen maintenance | 75,000 h @ L70B50, Ta 35 °C |
| Electrical | |
| System power (typ.) | 110 W |
| Input voltage | 220–240 V ~, 50/60 Hz |
| Power factor | 0.95 |
| Total harmonic distortion | ≤15% |
| Surge protection | 4 kV / 4 kV |
| Flicker | Flicker free · MD ≤3.2%, Pst ≤0.5, SVM ≤0.4 |
| Mechanical & environment | |
| Ingress / impact / corrosion | IP66 / IK08 / WF2 |
| Protection class | Class I |
| Ambient temperature | −40 °C to +50 °C (Ta 35 °C) |
| Operating humidity | 0–100% RH |
| Diameter × height | Ø330 × 99 mm |
| Weight | 2.6 kg |
| Housing colour | RAL 7012 dark grey |
| Connection | 0.3 m cable with IP connector |
| Installation & compliance | |
| Mounting | Hook or pipe suspension; surface bracket (both ordered separately) |
| Standard warranty | 3 years |
| Certification | CCC / CB |
BY690P LED200/NW PSU WB GC in the cold room
2023 / 2025 Left: 2023 body with a separate breather on the heat sink. Right: 2025 body, breather moved into the cable-exit hub.
Test rig Luminaire at −40 °C beside the evaporator coil, cycled 5 minutes on / 10 minutes off.
Body Ø330 × 99 mm — the LED200 body, 2.6 kg.
In service Cold-chain distribution centre: IP66 housing copes with door traffic and wash-down.
The full BY690P range — 911401541145 highlighted
Five output tiers, each in 4000 K (NW) and 6500 K (CW), wide beam, fixed output, GC version. The highlighted row is the code on this page.
| 12NC | Description | Power | Ø × H | Output |
|---|---|---|---|---|
| 911401540745 | BY690P LED105/NW PSU WB GC | 63 W | Ø290 × 90 | 10,500 lm |
| 911401540845 | BY690P LED105/CW PSU WB GC | 63 W | Ø290 × 90 | 10,500 lm |
| 911401540945 | BY690P LED150/NW PSU WB GC | 88 W | Ø290 × 90 | 15,000 lm |
| 911401541045 | BY690P LED150/CW PSU WB GC | 88 W | Ø290 × 90 | 15,000 lm |
| 911401541145 | BY690P LED200/NW PSU WB GC | 110 W | Ø330 × 99 | 20,000 lm |
| 911401541245 | BY690P LED200/CW PSU WB GC | 110 W | Ø330 × 99 | 20,000 lm |
| 911401541345 | BY690P LED250/NW PSU WB GC | 144 W | Ø393 × 99 | 25,500 lm |
| 911401541445 | BY690P LED250/CW PSU WB GC | 144 W | Ø393 × 99 | 25,500 lm |
| 911401541545 | BY690P LED300/NW PSU WB GC | 170 W | Ø393 × 99 | 30,000 lm |
| 911401541645 | BY690P LED300/CW PSU WB GC | 170 W | Ø393 × 99 | 30,000 lm |
Series page. The 2025 upgrade notes, the −40 °C test data and the cold-room selection logic are on the PHILIPS GreenPerform Cold Room Highbay BY690P Series page. Hook and bracket are quoted with the luminaires.
Also from the PHILIPS range
Frequently asked questions
What is in the box with 12NC 911401541145?
One BY690P LED200/NW PSU WB GC luminaire with a factory-fitted 0.3 m cable and IP connector, in an industrial carton. The mounting hook (911401559345) and the surface bracket (911401594191) are separate order lines and are not in the carton. Standard warranty is 3 years; certification CCC and CB.
Is 911401541145 the 4000 K or the 6500 K version?
It is the 4000 K neutral white (NW) version, 12NC 911401541145. The identical luminaire in the other colour temperature is 6500 K cool white (CW) (12NC 911401541245); optics, wattage and body are the same, only the CCT and the corresponding 12NC change.
How does the 110 W model compare with the 144 W one?
The 110 W (LED200) delivers 20,000 lm from an Ø330 mm body; the 144 W (LED250) delivers 25,500 lm from the larger Ø393 mm body. They are not interchangeable on the same fixing point: the bigger body is 63 mm wider, so it needs more clearance between services. Take the 110 W where the Ø393 mm body will not fit between services.

BY778P G2 Elite Highbay
BY175P G2 Highbay
BY518P SE GreenUp
WT198C G3 Waterproof
BVP150 G4 Floodlight
LL130X G2 Trunking
BGP150 G2 Spotlight
BRP26X Street Light


