Description
PHILIPS Xitanium LITE WideLine Pro LED Driver Series Xi LP 40W-150W
The Xitanium LITE WideLine Pro range pairs a 300-1050 mA adjustable output with full rated performance from 120 to 277 Vac, so one driver platform covers North American and European mains without a second SKU. Four power classes - 40 W, 65 W, 100 W and 150 W - are available, each with reinforced input-to-output isolation, IP67 sealing and 6 kV / 10 kV surge immunity for road, area and tunnel luminaires.
Why WideLine Pro
Efficiency at rated load, 230 Vac, maximum output voltage.
Feature highlights
Four decisions this driver simplifies.
One platform, four power classes
40 W, 65 W, 100 W and 150 W share the same 300-1050 mA output window and the same programming workflow, so a luminaire family scales by swapping the driver instead of redesigning the electronics.
Full performance at 120 V and 277 V
Rated performance holds across 120-277 Vac, against 202-254 Vac on the standard S1 WL version. One SKU serves North American and European grids.
NFC SimpleSet, no mains needed
Output current, driver temperature limit, light output and dimming mode are written over the near-field interface while the driver is still in its packaging.
Reinforced isolation, IP67 housing
Input to output isolation is reinforced to IEC 61347-1, and the sealed aluminium housing carries IP67 plus 6 kV differential and 10 kV common mode surge immunity.
Product gallery
Housing, mounting envelope, operating window and dimming interfaces.
Fig. 01 - Xi LP 40W Pro, three-quarter view
Pink end caps, silver housing, IP67 label with 12NC
Fig. 02 - Dimensions A1-B3 and cable lengths
126 / 143 mm body, 118.5 / 131.5 mm mounting pitch
Fig. 03 - Operating window, 40 W model
28-56 Vdc across a 300-1050 mA AOC window
Fig. 04 - Four dimming interfaces
0-10V / 1-10V / reversed 0-5V / reversed 1-9V
True wide range
The label and the datasheet tell two different stories. Only Pro covers the whole window at rated power.
Both nameplates read 100-277 Vac. That number is the operational envelope - the driver will start and run. What it does not tell you is where the full rated wattage actually holds. On the standard S1 WL version full performance is only guaranteed between 202 and 254 Vac, so a luminaire wired to a 120 V network or to a 277 V leg runs derated: the output power drops below the figure on the label. WideLine Pro moves that guaranteed window to 120-277 Vac, which is why the same driver can serve both grids without a second SKU - and why a 150 W luminaire still delivers 150 W at 120 V.
| Input condition | Standard S1 WL | WideLine Pro |
|---|---|---|
| Voltage printed on the driver label | 100-277 Vac | 100-277 Vac |
| Window where 100% rated power is guaranteed | 202-254 Vac | ▲ 120-277 Vac |
| Below that window | Output derated, wattage drops | ▲ Still full power down to 120 Vac |
| Above that window | Derated from 254 Vac upward | ▲ Full power up to 277 Vac |
| What that means on site | 120 V networks and 277 V legs lose output | Same luminaire, same wattage, any of the two grids |
One honest caveat: the 150 W Pro model allows Ta 55 °C only between 200 and 277 Vac, and Ta 45 °C between 100 and 200 Vac. Wide input range raises the electrical window, not the thermal budget. Size the luminaire thermal design on the ambient at the actual site voltage.
Both columns read from the Signify datasheets dated September 2026 and April 2025, taken at the 40 W power class where both versions exist. Pro also raises input to output isolation to reinforced, cuts THD from 15% to 10%, tightens PstLM and SVM to 0.1 and adds Dim to off plus 0-10V override DynaDimmer. Re-qualify the luminaire when moving a running design from standard to Pro.
Technical specifications
Values per Signify datasheet, September 2026. Ratings at 230 Vac unless stated.
| Specification | Xi LP 40W Pro | Xi LP 65W Pro | Xi LP 100W Pro | Xi LP 150W Pro |
|---|---|---|---|---|
| Electrical input | ||||
| Rated input voltage range (performance) | 120-277 Vac | 120-277 Vac | 120-277 Vac | 120-277 Vac |
| Input voltage AC (operational) | 95-305 Vac | 95-305 Vac | 95-305 Vac | 95-305 Vac |
| Rated input frequency | 47-63 Hz | 47-63 Hz | 47-63 Hz | 47-63 Hz |
| Rated input current | 0.20 A | 0.32 A | 0.47 A | 0.70 A |
| Maximum input current | 0.39 A | 0.62 A | 0.61 A | 0.85 A |
| Rated input power | 44.8 W | 72.0 W | 108.0 W | 163.0 W |
| Power factor | 0.95 | 0.95 | 0.95 | 0.95 |
| Total harmonic distortion | 10% | 10% | 10% | 10% |
| Efficiency at rated load | 90.0% | 90.5% | 93.5% | 94.0% |
| Standby power | 0.49 W | 0.49 W | 0.49 W | 0.49 W |
| Electrical output | ||||
| Regulation method | Constant current | Constant current | Constant current | Constant current |
| Output voltage | 28-56 Vdc | 45-93 Vdc | 71-143 Vdc | 120-214 Vdc |
| Maximum output voltage (rms) | 100 V | 130 V | 200 V | 260 V |
| Output current (AOC window) | 300-1050 mA | 300-1050 mA | 300-1050 mA | 300-1050 mA |
| Minimum programmable current | 300 mA | 300 mA | 300 mA | 300 mA |
| Output power range | 2.0-40.0 W | 3.2-65.0 W | 5.0-100.0 W | 8.4-150.0 W |
| Minimum performance output power | 20 W | 32.5 W | 50 W | 75 W |
| Current tolerance at full load | ±5% | ±5% | ±5% | ±5% |
| Current ripple, low frequency | ≤4% | ≤4% | ≤4% | ≤4% |
| Current ripple, high frequency | ≤15% | ≤15% | ≤15% | ≤15% |
| Output PstLM | ≤0.1 | ≤0.1 | ≤0.3 | ≤0.3 |
| Output SVM | ≤0.1 | ≤0.1 | ≤0.3 | ≤0.1 |
| Control interface | ||||
| Control method | 0-10V default | 0-10V default | 0-10V default | 0-10V default |
| Alternative modes | 1-10V / rev. 1-10V / rev. 0-5V | 1-10V / rev. 1-10V / rev. 0-5V | 1-10V / rev. 1-10V / rev. 0-5V | 1-10V / rev. 1-10V / rev. 0-5V |
| Dimming range | 10-100% | 10-100% | 10-100% | 10-100% |
| Dim to off | Below 0.5 V | Below 0.5 V | Below 0.5 V | Below 0.5 V |
| Mechanical | ||||
| Length A1 | 126 mm | 126 mm | 143 mm | 143 mm |
| Mounting hole distance A2 | 118.5 mm | 118.5 mm | 131.5 mm | 131.5 mm |
| Width B1 | 67.2 mm | 67.2 mm | 67.2 mm | 67.2 mm |
| Height C1 | 34 mm | 34 mm | 38 mm | 38 mm |
| Weight | 475 g | 475 g | 570 g | 570 g |
| Input / output / control cable | 3x1.0 / 2x1.0 / 2x0.3 mm² | 3x1.0 / 2x1.0 / 2x0.3 mm² | 3x1.0 / 2x1.0 / 2x0.3 mm² | 3x1.0 / 2x1.0 / 2x0.3 mm² |
| Maximum cable length | 2 m | 2 m | 2 m | 2 m |
| Environment and approvals | ||||
| Ambient temperature | -40 to +55 °C | -40 to +55 °C | -40 to +55 °C | -40 to +55 °C |
| Maximum Tcase | 85 °C | 85 °C | 90 °C | 90 °C |
| Driver lifetime | 50,000 h at Tc 80 °C | 50,000 h at Tc 80 °C | 50,000 h at Tc 85 °C | 50,000 h at Tc 85 °C |
| Extended lifetime | 100,000 h at Tc 70 °C | 100,000 h at Tc 70 °C | 100,000 h at Tc 75 °C | 100,000 h at Tc 75 °C |
| Protection class | I and II | I and II | I and II | I |
| Approvals | CB / CCC / CE / ENEC / UKCA | CB / CCC / CE / ENEC / UKCA | CB / CCC / CE / ENEC / UKCA | CB / CCC / CE / ENEC / UKCA |
Efficiency and lifetime
Taken from the datasheet gain curve and lifetime curve, not redrawn.
Efficiency stays above 86% at 120, 230 and 277 Vac across 20-40 W
Lifetime against Tcase: 100,000 h to 70 C, 50,000 h at 80 C
Wiring and installation
Independent mounting, outdoor use. See Fig. 02 for the mounting envelope and Fig. 04 for the dimming interfaces.
| Connection | Conductor | Length |
|---|---|---|
| Input cable | 3 x 1.0 mm² stranded | 450 mm |
| Output cable | 2 x 1.0 mm² stranded | 350 mm |
| Control cable | 2 x 0.3 mm² stranded | 250 mm |
| Maximum cable run | Including the LED module, one way | 2 m |
| Isolation to IEC 61347-1 | Level |
|---|---|
| Input to output | Reinforced |
| Input to dim | Reinforced |
| Dim to output | Reinforced |
| Output to ground | Basic |
- Programme the driver over SimpleSet NFC before it is energised; no mains connection is needed during configuration.
- In reversed dimming mode, when DIM+ / DIM- is left open the driver delivers its maximum output current.
- Up to 27 drivers may sit on one 16 A type B MCB at 230 V. Where breakers are mounted side by side without spacing pieces, apply the 80% correction factor to the rated current.
- Typical protective conductor current is 0.7 mA rms for Class I installations, LED module contribution excluded.
- Open load, short circuit, over power and overtemperature protection all recover automatically.
Complete product lineup
Four Pro power classes. Every one holds full rated power from 120 to 277 Vac.
| 12NC | Description | Power | Output voltage | Full rated power |
|---|---|---|---|---|
| 929004883201 | Xi LP 40W 0.3-1.05A S1 WL Pro I125 | 40 W | 28-56 Vdc | 120-277 Vac |
| 929004883301 | Xi LP 65W 0.3-1.05A S1 WL Pro I125 | 65 W | 45-93 Vdc | 120-277 Vac |
| 929004883401 | Xi LP 100W 0.3-1.05A S1 WL Pro I145 | 100 W | 71-143 Vdc | 120-277 Vac |
| 929004883501 | Xi LP 150W 0.3-1.05A S1 WL Pro I145 | 150 W | 120-214 Vdc | 120-277 Vac |
Width and height are common to all four models at 67.2 mm and 34 / 38 mm. Only the body length differs: 126 mm on the 40 W and 65 W, 143 mm on the 100 W and 150 W.
Standard S1 WL
Seven codes up to 250 W. Identical housing and output window, but full rated power only inside 202-254 Vac - not 120-277 Vac like the Pro range above.
| 12NC | Description | Power | Full rated power |
|---|---|---|---|
| 929003876580 | Xi LP 40W 0.3-1.05A S1 WL I125 | 40 W | 202-254 Vac |
| 929003876680 | Xi LP 65W 0.3-1.05A S1 WL I125 | 65 W | 202-254 Vac |
| 929003876780 | Xi LP 100W 0.3-1.05A S1 WL I145 | 100 W | 202-254 Vac |
| 929003876880 | Xi LP 150W 0.3-1.05A S1 WL I145 | 150 W | 202-254 Vac |
| 929003876901 | Xi LP 200W 0.3-1.05A S1 WL I165current code | 200 W | 202-254 Vac |
| 929003876980 | Xi LP 200W 0.3-1.05A S1 WL I165previous code | 200 W | 202-254 Vac |
| 929003877080 | Xi LP 250W 0.3-1.05A S1 WL I180 | 250 W | 202-254 Vac |
Two 12NCs, one product. 929003876901 is the current code for the 200 W model and 929003876980 the previous one. Both are supplied, so a bill of material written against the old code still matches, and both codes resolve to the same driver.
Pick the standard range where the mains stays inside 202-254 Vac and basic input to output isolation is acceptable. Pick Pro above 254 Vac, below 202 Vac, or where the luminaire needs reinforced isolation without a protective earth on the output side.
Also from PHILIPS Lighting
Luminaires and drivers that pair with the Xi LP platform.
Frequently asked questions
Version choice, programming, isolation and mains range.
What does true wide range mean, and how is it different from the 100-277 Vac on the label?
What is the difference between WideLine Pro and the standard Xi LP S1 WL driver?
Which output current can I set, and do I need mains power to program the driver?
Is the driver Class I or Class II, and what isolation does it provide?
Does the wide input range also raise the ambient temperature limit?
What surge protection and ingress rating does the series offer for street and tunnel lighting?




