Description
PHILIPS WideLine LED Driver Xi LP 200W 0.3-1.05A S1 WL I165 929003876901
The 200 W member of the Xi LP WideLine family, built for high output road, area and tunnel luminaires that need a single driver at 142-286 Vdc. It delivers 94.5% efficiency, 300-1050 mA programmable output and IP67 sealing, on mains that stay inside the 202-254 Vac full performance window.
Product details
One driver, one 12NC, 200 W at 142-286 Vdc.
- Description
- Xi LP 200W 0.3-1.05A S1 WL I165
- 12NC
- 929003876901
- Previous 12NC
- 929003876980
- Rated power
- 200 W
- Output voltage
- 142-286 Vdc
- Output current
- 300-1050 mA
- Efficiency
- 94.5%
- Dimensions
- 165 x 67.2 x 40 mm
- Weight
- 700 g
- Input to output isolation
- Basic
- Full power window
- 202-254 Vac
- Protection class
- Class I
Rated input current 0.93 A and rated input power 213 W at 230 Vac. Standby power 0.49 W, power factor above 0.95, THD 10%. Input to output isolation is basic on this model, against reinforced on the WideLine Pro range.
200 W or Pro
Same family, two different voltage promises. Pick by the mains you actually have.
| Item | This 200 W model | WideLine Pro 40-150 W |
|---|---|---|
| Voltage printed on the label | 100-277 Vac | 100-277 Vac |
| Full rated power guaranteed within | 202-254 Vac | 120-277 Vac |
| Reinforced input to output isolation | No | Yes |
| Maximum power class | 200 W | 150 W |
| Efficiency at rated load | 94.5% | 94.0% |
Where the mains stays inside 202-254 Vac and 200 W is needed, this model is the right choice and the most efficient in the family at 94.5%. Where the site runs 120 V or 277 V and the load fits inside 150 W, the WideLine Pro series keeps full output instead of derating.
Technical specifications
Signify datasheet, September 2026. Ratings at 230 Vac unless stated.
| Specification | Xi LP 200W 0.3-1.05A S1 WL I165 |
|---|---|
| Electrical input | |
| Rated input voltage range (performance) | 202-254 Vac |
| Input voltage AC (operational) | 95-305 Vac |
| Rated input frequency | 47-63 Hz |
| Rated input current | 0.93 A |
| Maximum input current | 1.07 A |
| Rated input power | 213 W |
| Power factor | 0.95 |
| Total harmonic distortion | 10% |
| Efficiency at rated load | 94.5% |
| Standby power | 0.49 W |
| Inrush current / peak width | 98 A / 210 µs |
| Drivers per 16 A type B MCB | 5 |
| Electrical output | |
| Regulation method | Constant current |
| Output voltage | 142-286 Vdc |
| Maximum output voltage (rms) | 350 V |
| Output current (AOC window) | 300-1050 mA |
| Minimum programmable current | 300 mA |
| Minimum output current | 70 mA |
| Output power range | 10.0-200.0 W |
| Minimum performance output power | 100 W |
| Current tolerance at full load | ±5% |
| Current ripple, low frequency | ≤4% |
| Current ripple, high frequency | ≤15% |
| Output PstLM / SVM | ≤0.3 / ≤0.1 |
| Control interface | |
| Control method | 0-10V default |
| Alternative modes | 1-10V / rev. 1-10V / rev. 0-5V |
| Dimming range | 10-100% |
| Dim to off | Below 0.5 V |
| Isolation, control to output | Reinforced |
| Mechanical | |
| Length A1 / mounting A2 | 165 mm / 153 mm |
| Width B1 / height C1 | 67.2 mm / 40 mm |
| Weight | 700 g |
| Input / output / control cable | 3x1.0 / 2x1.0 / 2x0.3 mm² |
| Cable lengths E1 / E2 / E3 | 450 / 350 / 250 mm |
| Maximum cable length | 2 m |
| Environment and approvals | |
| Ambient temperature | -40 to +55 °C |
| Maximum Tcase | 85 °C |
| Driver lifetime | 50,000 h at Tc 85 °C |
| Extended lifetime | 100,000 h at Tc 75 °C |
| Protection class | Class I per IEC 60598 |
| Ingress protection | IP67 |
| Approvals | CB / CCC / CE / ENEC / UKCA |
Product gallery
Housing, mounting envelope, operating window and dimming interfaces.
Fig. 01 - Xi LP 200W, three-quarter view
Pink end caps, 700 g housing, IP67 label
Fig. 02 - Dimensions A1 to C1
165 mm body, 153 mm mounting pitch, 40 mm height
Fig. 03 - Operating window
142-286 Vdc across the 300-1050 mA window
Fig. 04 - Four dimming interfaces
0-10V default, reversed modes optional
Efficiency and lifetime
Read from the datasheet curves, not redrawn.
Efficiency 93.5-95.5% across 100-200 W, 120 Vac curve lowest
Lifetime against Tcase, 10% maximum failures
Wiring and installation
Independent mounting, outdoor use. See Fig. 02 for the mounting envelope and Fig. 04 for the dimming interfaces.
| Connection | Conductor | Length |
|---|---|---|
| Input cable | 3 x 1.0 mm² stranded | 450 mm |
| Output cable | 2 x 1.0 mm² stranded | 350 mm |
| Control cable | 2 x 0.3 mm² stranded | 250 mm |
| Maximum cable run | Including the LED module, one way | 2 m |
- Programme the output current over SimpleSet NFC before energising; no mains connection is needed.
- In reversed dimming mode, when DIM+ / DIM- is left open the driver delivers maximum output current.
- Only five of these drivers fit on one 16 A type B MCB at 230 V, against 27 of the 40 W and 65 W models.
- Hot wiring is not supported. Isolate the circuit before connecting the driver.
- Open load, short circuit, over power and overtemperature protection all recover automatically.
Standard S1 WL lineup
Six power classes on the 202-254 Vac full performance window. Current model highlighted.
| 12NC | Description | Power | Output voltage |
|---|---|---|---|
| 929003876580 | Xi LP 40W 0.3-1.05A S1 WL I125 | 40 W | 28-56 Vdc |
| 929003876680 | Xi LP 65W 0.3-1.05A S1 WL I125 | 65 W | 45-93 Vdc |
| 929003876780 | Xi LP 100W 0.3-1.05A S1 WL I145 | 100 W | 71-143 Vdc |
| 929003876880 | Xi LP 150W 0.3-1.05A S1 WL I145 | 150 W | 120-214 Vdc |
| 929003876901 | ▸ Xi LP 200W 0.3-1.05A S1 WL I165 | 200 W | 142-286 Vdc |
| 929003876980 | Xi LP 200W 0.3-1.05A S1 WL I165previous code | 200 W | 142-286 Vdc |
| 929003877080 | Xi LP 250W 0.3-1.05A S1 WL I180 | 250 W | 178-358 Vdc |
Two 12NCs, one product. 929003876901 is the current code and 929003876980 the previous one. Both are supplied and both resolve to the same 200 W driver, so a bill of material written against the old code still matches. Order either code.
Six power classes, one 300-1050 mA output window. Browse more in PHILIPS outdoor LED drivers or filter by Xitanium drivers.
Also from PHILIPS Lighting
Luminaires and drivers that pair with the Xi LP platform.
Frequently asked questions
Wide range, circuit capacity and output window.
Is the 200 W model a true wide range driver like the Pro series?
How many 200 W drivers fit on one circuit breaker?
What output voltage and current does the 200 W model provide?




