Description
PHILIPS WideLine Pro LED Driver Xi LP 65W 0.3-1.05A S1 WL Pro I125 929004883301
Xitanium LITE WideLine Pro outdoor driver, 65 W class, on a 45-93 Vdc output window. Rated power holds across 120-277 Vac, so the same 12NC serves 120 V, 230 V and 277 V networks, with reinforced input to output isolation and IP67 sealing.
Product details
65 W Pro, 12NC 929004883301.
- Description
- Xi LP 65W 0.3-1.05A S1 WL Pro I125
- 12NC
- 929004883301
- Rated power
- 65 W
- Output voltage
- 45-93 Vdc
- Output current
- 300-1050 mA
- Efficiency
- 90.5%
- Dimensions
- 126 mm x 67.2 mm
- Weight
- 475 g
- Isolation in to out
- Reinforced
- Full rated power
- 120-277 Vac
- Protection class
- I and II
Rated input current 0.32 A, maximum 0.62 A, rated input power 72.0 W at 230 Vac. Power factor 0.95, THD 10%, standby 0.49 W. 16 pieces per box.
Wiring and installation
Independent mounting, outdoor use. See Fig. 02 for the mounting envelope and Fig. 04 for the dimming interfaces.
| Connection | Conductor | Length |
|---|---|---|
| Input cable | 3 x 1.0 mm² stranded | 450 mm |
| Output cable | 2 x 1.0 mm² stranded | 350 mm |
| Control cable | 2 x 0.3 mm² stranded | 250 mm |
| Maximum cable run | Including the LED module, one way | 2 m |
- Programme current, DTL, ALO, CLO and dimming mode over SimpleSet NFC before energising; no mains needed.
- In reversed dimming mode, when DIM+ / DIM- is left open the driver delivers maximum output current.
- Hot wiring is not supported. Isolate the circuit before connecting the driver.
- Open load, short circuit, over power and overtemperature protection all recover automatically.
- Diagnostics run through the Signify tool.
Technical specifications
Signify datasheet, September 2026. Ratings at 230 Vac unless stated.
| Specification | Xi LP 65W 0.3-1.05A S1 WL Pro I125 |
|---|---|
| Electrical input | |
| Rated input voltage range (performance) | 120-277 Vac |
| Input voltage AC (operational) | 95-305 Vac |
| Rated input frequency | 47-63 Hz |
| Rated input current | 0.32 A |
| Maximum input current | 0.62 A |
| Rated input power | 72.0 W |
| Power factor / THD | 0.95 / 10% |
| Efficiency at rated load | 90.5% |
| Standby power | 0.49 W |
| Electrical output | |
| Regulation method | Constant current |
| Output voltage | 45-93 Vdc |
| Maximum output voltage (rms) | 130 V |
| Output current (AOC window) | 300-1050 mA |
| Minimum programmable current | 300 mA |
| Minimum output current | 70 mA |
| Output power range | 3.2-65.0 W |
| Minimum performance output power | 32.5 W |
| Current tolerance at full load | ±5% |
| Current ripple LF / HF | ≤4% / ≤15% |
| Output PstLM / SVM | ≤0.1 / ≤0.1 |
| Control interface | |
| Control method | 0-10V default |
| Alternative modes | 1-10V / rev. 1-10V / rev. 0-5V |
| Dimming range | 10-100% |
| Dim to off | Below 0.5 V |
| Isolation, control to output | Reinforced |
| Mechanical | |
| Length A1 / mounting A2 | 126 mm / 118.5 mm |
| Length A3 / hole D1 | 107 mm / 4.2 mm |
| Width B1 / height C1 | 67.2 mm / 34 mm |
| Weight | 475 g |
| Input / output / control cable | 3x1.0 / 2x1.0 / 2x0.3 mm² |
| Maximum cable length | 2 m |
| Environment and approvals | |
| Ambient temperature | -40 to +55 °C |
| Maximum Tcase | 85 °C |
| Driver lifetime | 50,000 h at Tc 80 °C |
| Extended lifetime | 100,000 h at Tc 70 °C |
| Protection class | I and II |
| Ingress protection | IP67 |
| Approvals | CB / CCC / CE / ENEC / UKCA |
Product gallery
Series images. The housing, mounting envelope and dimming interfaces are shared across the four Pro models.
Fig. 01 - Xi LP Pro housing, three-quarter view
Pink end caps, IP67 label with 12NC
Fig. 02 - Dimensions and cable lengths
126 mm body on 40 W and 65 W, 143 mm on 100 W and 150 W
Fig. 03 - Operating window, 40 W model shown
Each model has its own Vdc window; see the specification table
Fig. 04 - Four dimming interfaces
0-10V default, reversed modes optional
Complete Pro lineup
Four power classes on one 120-277 Vac full power window. Current model highlighted.
| 12NC | Description | Power | Output voltage | Full rated power |
|---|---|---|---|---|
| 929004883201 | Xi LP 40W 0.3-1.05A S1 WL Pro I125 | 40 W | 28-56 Vdc | 120-277 Vac |
| 929004883301 | ▸ Xi LP 65W 0.3-1.05A S1 WL Pro I125 | 65 W | 45-93 Vdc | 120-277 Vac |
| 929004883401 | Xi LP 100W 0.3-1.05A S1 WL Pro I145 | 100 W | 71-143 Vdc | 120-277 Vac |
| 929004883501 | Xi LP 150W 0.3-1.05A S1 WL Pro I145 | 150 W | 120-214 Vdc | 120-277 Vac |
Back to the Xi LP WideLine Pro series overview, or browse PHILIPS outdoor LED drivers and Xitanium drivers.
Also from PHILIPS Lighting
Luminaires and drivers that pair with the Xi LP platform.
Frequently asked questions
Output window, voltage behaviour and installation limits for the 65 W model.
Which module voltage suits the 65 W model?
Is the 65 W model the same body as the 40 W?
Can I set the 65 W output to 700 mA in the factory default?




