Description
PHILIPS Slim LED Downlight Series DN200 G3 — Small Cut-out Power Upgrade
PHILIPS DN200 G3 9 new SKUs 5 W / 7 W / 9 W 3000 K / 4000 K / 6500 K Cut-out Ø70–105 mm Body height ≤ 35 mm Class II
The DN200 G3 slim LED downlight keeps its Ø 80, 90 and 100 mm cut-outs — and gains power. Three small-aperture sizes move from 3.5 / 4.5 / 7 W to 5 / 7 / 9 W, lifting flux to 400 / 560 / 720 lm without touching the ceiling hole, the bezel outline or the wiring. Part of the PHILIPS LED downlight range.
Same hole in the ceiling. Up to 40 % more light.
Rated figures for 3000 K (830). 4000 K (840) and 6500 K (865) are identical in power and flux.
D80 · cut-out Ø70–80 mm
Previous G33.5 W300 lm
New5 W400 lm
↑ +33 % flux · ↑ +43 % power
Replaces DN200 G3 LED3 830 3.5W D80 CN
D90 · cut-out Ø85–95 mm
Previous G34.5 W400 lm
New7 W560 lm
↑ +40 % flux · ↑ +56 % power
Replaces DN200 G3 LED4 830 4.5W D90 CN
D100 · cut-out Ø95–105 mm
Previous G37 W600 lm
New9 W720 lm
↑ +20 % flux · ↑ +29 % power
Replaces DN200 G3 LED6 830 7W D100 CN
Cut-out unchanged
Ø70–80, Ø85–95 and Ø95–105 mm. An existing ceiling can be refitted SKU-for-SKU without enlarging or patching the aperture.
Bezel and body unchanged
Same one-piece white PC body, same 35 mm depth, same flange diameters Ø90 / Ø105 / Ø115 mm.
Wiring unchanged
Flying lead, integral driver, Class II, 220–240 V ~ 50/60 Hz, PF 0.5 — the same loop and the same switch.
CCT range unchanged
Still 3000 K / 4000 K / 6500 K on every size, so a mixed ceiling keeps its colour consistency.
35 mm of depth, and a bezel that stays out of the way
Slim one-piece housing cuts the ceiling void needed; the narrow bezel pushes the diffuser out to the edge of the flange.
| Size | Cut-out | Flange Ø | Light area Ø | Body height |
|---|---|---|---|---|
| D80 | Ø70–80 mm | Ø90 mm | Ø64 mm | 35 mm |
| D90 | Ø85–95 mm | Ø105 mm | Ø79 mm | 35 mm |
| D100 | Ø95–105 mm | Ø115 mm | Ø89 mm | 35 mm |
Body, range, dimensions and application
The same housing on every aperture — front view, the full seven-size range, the cut-out dimensioning, and a typical retail ceiling.
One-piece body, narrow white bezel
The diffuser runs almost to the edge of the flange, so the visible aperture reads larger than the cut-out behind it.
Seven apertures, one body
D80 to D200, 400 lm to 2,000 lm. Same 35 mm depth and the same white PC housing across the range.
Cut-out, flange and light area
Each size is dimensioned three ways: the cut-out range it accepts, the flange it shows, and the lit surface in between.
Retail aisle, continuous rows
D90 and D100 carry the general aisle lighting at 560-720 lm; D80 fills the tighter perimeter runs at 400 lm.
Six ceilings this aperture was designed for
A 35 mm body and a narrow bezel suit shallow or tightly scheduled ceilings; the Ø64–89 mm light area keeps spacing predictable.
Supermarket
Continuous rows on tight centres; D90 and D100 carry the general aisle lighting at 560–720 lm.
Retail shops
Narrow bezel keeps the ceiling plane clean where the fitting sits close to merchandise.
Office
3000 K to 6500 K across one family; SDCM ≤ 5 holds colour on a large open ceiling.
Hotel
D80 at 400 lm for corridors and guest-room perimeters where depth is limited.
Shopping mall
Mixed D80 / D90 / D100 layouts stay visually matched — one body, three apertures.
Metro station
Class II, CCC certified, 220–240 V, −20 °C to +40 °C ambient for public transport interiors.
Technical specifications
Rated values. Where a value is shared across the three sizes it is merged across the columns.
| Parameter | D80 · 5 W | D90 · 7 W | D100 · 9 W |
|---|---|---|---|
| Optical | |||
| Colour temperature | 3000 K / 4000 K / 6500 K (830 / 840 / 865) | ||
| Luminous flux | 400 lm | 560 lm | 720 lm |
| Efficacy | 80 lm/W | 80 lm/W | 80 lm/W |
| Colour rendering | CRI ≥ 80 · SDCM ≤ 5 | ||
| Electrical | |||
| Rated power | 5 W | 7 W | 9 W |
| Voltage & frequency | 220–240 V ~ 50/60 Hz | ||
| Power factor | 0.5 | ||
| Connection | Flying lead, driver integrated | ||
| Insulation class | Class II | ||
| Mechanical | |||
| Cut-out | Ø70–80 mm | Ø85–95 mm | Ø95–105 mm |
| Product dimensions | Ø90 × 35 mm | Ø105 × 35 mm | Ø115 × 35 mm |
| Light-emitting surface | Ø64 mm | Ø79 mm | Ø89 mm |
| Material & finish | One-piece white PC housing | ||
| Pcs per carton | 50 | ||
| Lifetime & compliance | |||
| Lifetime | 20,000 h (L70B50 @ 25 °C) | ||
| Operating temperature | Ambient Ta −20 °C to +40 °C | ||
| Certification | CCC · CE · CB | ||
| Photobiological safety | No blue-light hazard · no visible flicker | ||
Complete product lineup — 9 new SKUs
All nine are new items. Each row links to its own product page with the full specification sheet.
| 12NC | Description | Power | Cut-out | Flux |
|---|---|---|---|---|
| 929004941310 | DN200 G3 LED4 830 5W D80 CN | 5 W | Ø70–80 | 400 lm |
| 929004941410 | DN200 G3 LED4 840 5W D80 CN | 5 W | Ø70–80 | 400 lm |
| 929004941510 | DN200 G3 LED4 865 5W D80 CN | 5 W | Ø70–80 | 400 lm |
| 929004941610 | DN200 G3 LED5 830 7W D90 CN | 7 W | Ø85–95 | 560 lm |
| 929004941710 | DN200 G3 LED5 840 7W D90 CN | 7 W | Ø85–95 | 560 lm |
| 929004941810 | DN200 G3 LED5 865 7W D90 CN | 7 W | Ø85–95 | 560 lm |
| 929004941910 | DN200 G3 LED7 830 9W D100 CN | 9 W | Ø95–105 | 720 lm |
| 929004942010 | DN200 G3 LED7 840 9W D100 CN | 9 W | Ø95–105 | 720 lm |
| 929004942110 | DN200 G3 LED7 865 9W D100 CN | 9 W | Ø95–105 | 720 lm |
The DN200 G3 platform continues to 2000 lm
Same body, same 35 mm depth, larger apertures. Every size below is already published — useful when one ceiling mixes zones of different illuminance.
Also from the PHILIPS lighting range
Other Honnex-published PHILIPS series, from the same indoor ceiling family to outdoor and industrial.
Frequently asked questions
What is different between the new DN200 G3 and the model it replaces?
Power and flux, nothing else. The D80 goes from 3.5 W / 300 lm to 5 W / 400 lm, the D90 from 4.5 W / 400 lm to 7 W / 560 lm, and the D100 from 7 W / 600 lm to 9 W / 720 lm. Cut-out, flange diameter, body depth, bezel profile, wiring and insulation class are unchanged, so an existing layout can be refitted without touching the ceiling.
Will the new 5 W version fit the same Ø80 mm hole?
Yes. The D80 accepts a cut-out of Ø70–80 mm, exactly as before. The flange is Ø90 mm and the body is 35 mm deep, so the same aperture and the same ceiling void work for both the old and the new SKU.
Which colour temperatures are available?
Every size is offered in 3000 K (830), 4000 K (840) and 6500 K (865), giving nine SKUs across the three small apertures. Colour rendering is CRI ≥ 80 with SDCM ≤ 5, so fixtures from different batches remain visually consistent on the same ceiling.
Is the driver built in, and what supply does it need?
The driver is integrated and the luminaire is supplied with a flying lead. Input is 220–240 V ~ 50/60 Hz with a power factor of 0.5, and the fitting is Class II — no earth conductor is required. Rated lifetime is 20,000 hours (L70B50 at 25 °C) for an ambient range of −20 °C to +40 °C.
Which certifications come with the DN200 G3, and how do I check authenticity?
The range holds CCC, CE and CB certification, meets the national energy efficiency labelling requirement for indoor LED luminaires, and carries photobiological safety certification with no blue-light hazard and no visible flicker. Each unit also carries a QR code for verification. Carton quantity is 50 pieces for all nine items.
