Description
DN200 G3 LED4 840 5W D80 CN — 4000 K neutral white, Ø70–80 mm cut-out
PHILIPS 929004941410 5 W 400 lm 4000 K neutral white Cut-out Ø70–80 mm Ø90 × H 35 mm Class II
400 lm at 4000 K neutral white from a Ø70–80 mm cut-out, in a 35 mm body. One of the nine new DN200 G3 items.
DN200 G3 LED4 840 5W D80 CN at 4000 K neutral white
Part of the PHILIPS Slim LED Downlight Series DN200 G3 — nine new items across three small apertures.
This is the D80 item at 4000 K. 400 lm from a Ø70–80 mm cut-out, in the neutral white that most retail and office ceilings are specified in. It replaces the 3.5 W DN200 G3 LED3 840 at the same aperture, so a shop refit can move up in output without moving a single hole.
- 12NC
- 929004941410
- Description
- DN200 G3 LED4 840 5W D80 CN
- Power
- 5 W
- Luminous flux
- 400 lm
- Colour temperature
- 4000 K neutral white
- Cut-out
- Ø70–80 mm
- Dimensions
- Ø90 × H 35 mm
- Pieces per carton
- 50
Drops into an existing Ø70–80 mm hole
Same cut-out, same flange, same connection as the 3.5 W LED3 it replaces — only the light output changes.
Cut-out and clearance
Accepts a ceiling aperture of Ø70–80 mm. The flange covers Ø90 mm and the housing needs 35 mm of void above the ceiling line, which is the whole body depth — no extra clearance for a remote driver.
Connection
Integral driver with a flying lead, 220–240 V ~ 50/60 Hz, power factor 0.5. Class II, so no earth conductor is required at the fitting. The lead is the same on all nine items, so a mixed ceiling is wired the same way everywhere.
What changes on a refit
Output goes from 300 lm to 400 lm and the rated load from the previous value to 5 W. Aperture, spacing, bezel and wiring stay exactly as drawn. If a ceiling is being replaced item for item, the circuit allowance is the only thing that needs checking.
Model it replaces
The previous generation of this aperture is the DN200 G3 LED3 840 3.5W D80 CN at 3.5 W / 300 lm — same cut-out, lower output.
Technical specifications — DN200 G3 LED4 840 5W D80 CN
Rated values for this item. Shared values are identical across the nine DN200 G3 items.
| Optical | |
| Colour temperature | 4000 (840) |
| Luminous flux | 400 lm |
| Efficacy | 80 lm/W |
| Colour rendering | CRI ≥ 80 |
| Colour consistency | SDCM ≤ 5 |
| Electrical | |
| Rated power | 5 W |
| Voltage & frequency | 220–240 V ~ 50/60 Hz |
| Power factor | 0.5 |
| Connection | Flying lead, driver integrated |
| Insulation class | Class II |
| Mechanical | |
| Cut-out | Ø70–80 mm |
| Product dimensions | Ø90 × H 35 mm |
| Light-emitting surface | Ø64 mm |
| Material & finish | One-piece white PC housing |
| Pieces per carton | 50 |
| Lifetime & compliance | |
| Lifetime | 20,000 h (L70B50 @ 25 °C) |
| Operating temperature | Ambient Ta −20 °C to +40 °C |
| Certification | CCC · CE · CB |
| Photobiological safety | No blue-light hazard · no visible flicker |
Body, range, dimensions and application
The same four images are used across the DN200 G3 range — the housing is identical on every aperture.
One-piece body, narrow white bezel
The diffuser runs almost to the edge of the flange, so the visible aperture reads larger than the cut-out behind it.
Seven apertures, one body
D80 to D200, 400 lm to 2,000 lm. Same 35 mm depth and the same white PC housing across the range.
Cut-out, flange and light area
Each size is dimensioned three ways: the cut-out range it accepts, the flange it shows, and the lit surface in between.
Retail aisle, continuous rows
D90 and D100 carry the general aisle lighting at 560-720 lm; D80 fills the tighter perimeter runs at 400 lm.
DN200 G3 lineup — the nine new items
The row in amber is this item. Pick another size or colour temperature from the same table.
| 12NC | Description | Power | Cut-out | Flux |
|---|---|---|---|---|
| 929004941310 | DN200 G3 LED4 830 5W D80 CN | 5 W | Ø70–80 | 400 lm |
| 929004941410 | DN200 G3 LED4 840 5W D80 CN | 5 W | Ø70–80 | 400 lm |
| 929004941510 | DN200 G3 LED4 865 5W D80 CN | 5 W | Ø70–80 | 400 lm |
| 929004941610 | DN200 G3 LED5 830 7W D90 CN | 7 W | Ø85–95 | 560 lm |
| 929004941710 | DN200 G3 LED5 840 7W D90 CN | 7 W | Ø85–95 | 560 lm |
| 929004941810 | DN200 G3 LED5 865 7W D90 CN | 7 W | Ø85–95 | 560 lm |
| 929004941910 | DN200 G3 LED7 830 9W D100 CN | 9 W | Ø95–105 | 720 lm |
| 929004942010 | DN200 G3 LED7 840 9W D100 CN | 9 W | Ø95–105 | 720 lm |
| 929004942110 | DN200 G3 LED7 865 9W D100 CN | 9 W | Ø95–105 | 720 lm |
Also from the PHILIPS lighting range
Other Honnex-published PHILIPS series, from the same indoor ceiling family to outdoor and industrial.
Frequently asked questions
Is 929004941410 a straight replacement for the 3.5 W LED3 it replaces?
Yes on the ceiling, no on the electrical load. The cut-out (Ø70–80 mm), flange (Ø90 mm), body depth (35 mm) and Class II flying-lead connection are unchanged, so DN200 G3 LED4 840 5W D80 CN drops straight into the existing aperture and loop. The difference is 400 lm instead of 300 lm, which draws 5 W rather than the previous figure — check the circuit allowance before changing a full ceiling.
Where does 4000 K neutral white suit a ceiling?
Neutral white at 4000 K, smallest aperture. Typically supermarket aisles and office ceilings. The 35 mm body takes it into shallow slab, metal ceiling and plasterboard voids where a deep downlight will not fit, and SDCM ≤ 5 keeps colour consistent across a large ceiling.
Can this item sit next to other DN200 G3 sizes on one ceiling?
Yes. All nine items share one housing design, one 35 mm depth, the same white PC finish and the same SDCM ≤ 5 tolerance, so D80, D90 and D100 read as one family. The DN200 G3 series page lists the full range from 400 lm to 2,000 lm if one ceiling needs more than one output level.
