Description
PHILIPS Deep Recessed LED Downlight Series DN350
DN350N LED10/WW 10W 220-240V D90 SV CN — 10W anti-glare recessed LED downlight delivering 980 lm at 3000K (Warm White), CRI≥90, UGR<19, IP54 splash-proof front ring, and a flicker-free external constant-current driver. Direct retrofit for Ø 90 mm ceiling cut-outs.
Product Details
Key identification and performance data for 12NC 929004794700.
Installation & Wiring
Installation guidance for the DN350N 10W variant.
Recessed Ceiling Mounting
Tool-free installation with spring clips into plaster or gypsum ceilings. The deep-canister housing fits the Ø 90 mm cut-out and keeps the LED module recessed for UGR < 19 anti-glare performance.
External Constant-Current Driver
Powered by a separate flicker-free driver (ripple current < 1%), installed above the ceiling or in the junction box. Suitable for 220 – 240 V AC, 50 / 60 Hz mains.
Wiring & Safety
Connect driver output to the luminaire (L / N polarity as marked), and driver input to mains. Always switch off the circuit before installation or maintenance. Keep the housing clear of thermal insulation for adequate heat dissipation.
Technical Specifications
Full parameter set for DN350N LED10/WW 10W 220-240V D90 SV CN.
| Optical | |
| Lumen Output | 980 lm |
| Efficacy | up to 100 lm/W |
| Color Temperature | 3000K (Warm White) |
| CRI | ≥ 90 |
| Beam Angle | 60° |
| UGR | < 19 |
| SDCM | ≤ 5 |
| Electrical | |
| Input Voltage | 220 – 240 V AC, 50 / 60 Hz |
| Power Factor | 0.9 |
| Driver Type | External constant-current driver, flicker-free (ripple current < 1%) |
| Mechanical & Environmental | |
| Cut-out Size | Ø 90 mm |
| Product Size | Ø 96 × 58 mm |
| Housing Material | Aluminum + Polycarbonate (PC) |
| Body Color | Silver |
| IP Rating (Front Ring) | IP54 |
| Mounting Type | Recessed (嵌入式) |
| Ambient Temperature | -20 °C < Ta < 40 °C |
| Rated Lifetime | 30,000 hrs L70B50 @ T25 °C |
Product Gallery
Package, housing, installation and optical views of the DN350 series.
Physical Dimensions
This SKU (D90 / 10W) is highlighted in yellow. All 5 cut-out variants share the same optical and electrical architecture.
| Cut-out Code | Power | Cut-out Size | Product Size | Lumen | Packing |
|---|---|---|---|---|---|
| D75 | 7 W | Ø 75 mm | Ø 82 × 52 mm | 680 lm | 30 pcs |
| D90 | 10 W | Ø 90 mm | Ø 96 × 58 mm | 980 lm | 30 pcs |
| D125 | 12 W | Ø 120 – 130 mm | Ø 144 × 73 mm | 1200 lm | 12 pcs |
| D150 | 20 W | Ø 145 – 155 mm | Ø 170 × 82 mm | 2000 lm | 12 pcs |
| D175 | 32 W | Ø 170 – 180 mm | Ø 195 × 89 mm | 3200 lm | 12 pcs |
Complete Product Lineup
All DN350N variants in stock. The current SKU is highlighted in yellow.
| 12NC | Description | Cut-out | Power | CCT | Lumen |
|---|---|---|---|---|---|
| 929004794110 | DN350N LED7/WW 7W 220-240V D75 SV CN | Ø 75 mm | 7W | 3000K | 680 lm |
| 929004794210 | DN350N LED7/NW 7W 220-240V D75 SV CN | Ø 75 mm | 7W | 4000K | 680 lm |
| 929004794310 | DN350N LED7/CW 7W 220-240V D75 SV CN | Ø 75 mm | 7W | 6500K | 680 lm |
| 929004794700 | DN350N LED10/WW 10W 220-240V D90 SV CN | Ø 90 mm | 10W | 3000K | 980 lm |
| 929004794810 | DN350N LED10/NW 10W 220-240V D90 SV CN | Ø 90 mm | 10W | 4000K | 980 lm |
| 929004794910 | DN350N LED10/CW 10W 220-240V D90 SV CN | Ø 90 mm | 10W | 6500K | 980 lm |
Also from PHILIPS Indoor Lighting Range
Related PHILIPS / Signify fixtures stocked at Wenzhou Honnex Trading. Click any product to open its full specification page.
Frequently Asked Questions
Technical and commercial questions specific to DN350N LED10/WW 10W 220-240V D90 SV CN.
What ceiling cut-out does the DN350N LED10/WW 10W 220-240V D90 SV CN require?
What is the light output and color temperature of the DN350N LED10/WW 10W 220-240V D90 SV CN?
Where can I buy the DN350N LED10/WW 10W 220-240V D90 SV CN and what warranty applies?
Request a Quotation for DN350N LED10/WW 10W 220-240V D90 SV CN
Wenzhou Honnex Trading Co., Ltd. has been an authorized PHILIPS lighting distributor for over 15 years. We provide original PHILIPS / Signify products with full warranty, IES files, technical datasheets, and bulk pricing for projects, distributors, and contractors.






